Multitubular Dust Collector Type - CIF

INDVENT Multiclone Dust Controller Type-CIF meets the demand for a medium efficiency and suitable for all purpose. The CIF type Dust Controller is constituted in cellular form to cells that can be combined in any number. This ensures equal efficiency from the largest to the smallest unit.

Construction

The collector is build up of unit cells. Each cell consists of two concentric tubes, an outer cylinder with stationary vanes fixed at the inlet end, and an inner clean gas tube which passes upwards through the centre of the fixed vanes.

Principle

The dust particle bearing gas enters at the top of each cell through the fixed vanes which impart a swirl and throw the dust to the wall of the outer tube. The clean gas then reverses direction before leaving through the clean gas tube, while the dust discharges downwards into a hopper, common to a bank of cells.

Efficiency and Space Requirements

No. of
tubes
Volume
(m/hr.)
Dimensions in mm.
A
B
C
E
F
G
9 9,000 3730 1240 1080 375 650 800
12 12,000 3730 1240 1430 375 650 800
15 15,000 3730 1240 1780 375 650 800
20 20,000 4620 1850 1430 460 825 850
25 25,000 4620 1850 1780 460 825 850
30 30,000 4620 1850 2130 460 825 850
35 35,000 4620 1850 2480 460 825 850
Note: All dimensions are approximate & subject to change without notice.